EnCapsulator - How to Use

Compatible with Silver Age size only (for now), you can stand it up, or hang it vertically or horizontally! Your display, your way. See tutorial videos below:

Vertical Stand Display #1

Step 1 : After removing the insert, align the Silver Age Size ComicCapsule to the back of the Encapsulator and snap it in (make sure all sides are nicely snapped in).

Step 2 : Extend the stand and it is now ready for display!

Watch Tutorial Video: 

Extended Vertical Stand Display #2

You can also extend the stand for a more upright view.

How to Extend the Stand:
Gently push one side of the stand downward to extend it. To lock it back in place, simply snap it upwards until it clicks securely. Do it on both sides.

Watch Tutorial Video:

To Hang with the Encapsulator:

Vertical Orientation

Use the hook at the back of the ComicCapsule to hang on a nail/pin on the wall. Make sure the stand is tucked back in.

Horizontal Orientation

You'll need to remove the stand to hang it horizontally. Remove the stand by carefully ejecting them at the side brackets.

Eject the stands by pressing down on the hinge and pulling them out (do it on both sides).

Important:
There are two loose pieces that connect the stand to the bracket when the stand is extended. Be sure to keep them as they’re essential for reusing the stand.

Watch Video:

Putting the Stand Back:

Step 1: Use back the connector, place the round side onto the stand and slide it back into the side bracket. Do it on both sides.